| Attribute | Specification / Options |
|---|
| Seal category | Radial shaft seal / oil seal |
| System compatibility | Gearboxes + reducers |
| Sealing principle | Elastomer lip with lubricating film (operation dependent) |
| Lip configuration | Single lip / Double lip |
| Dust exclusion | Optional auxiliary dust lip |
| Spring energizer | Garter spring (optional stainless) |
| Outer diameter | Press-fit (metal case) or enhanced sealing (rubber OD) |
| OD options | Metal case / Rubber-covered OD / Rubber OD |
| Case material | Steel / Stainless optional |
| Lip materials | NBR / FKM / HNBR / PTFE |
| Compound selection | Chosen by media + temperature |
| Lubricants | Gear oils, greases (confirm for synthetics) |
| Temperature capability | Material dependent |
| Speed capability | Material/profile dependent |
| Pressure capability | Low pressure typical |
| Shaft size | Metric/inch custom sizes |
| Bore size | Metric/inch custom sizes |
| Width | Multiple profiles available |
| Rotation direction | Bi-directional standard |
| Runout resistance | Profile dependent |
| Misalignment resistance | Profile dependent |
| Shaft finish | Fine finish recommended |
| Shaft hardness | Recommended per contamination level |
| OD interference | Designed for stable press-fit |
| Installation | Press-fit; avoid lip damage |
| Chamfer recommendation | Recommended on shaft/housing |
| Assembly aid | Protective sleeve for splines optional |
| Corrosion option | Stainless case or coatings optional |
| Wear control | Optimized lip preload + compound choice |
| Drag torque | Depends on preload and lubrication |
| Heat generation | Controlled by selection and installation |
| Cleanliness | Sealing helps keep lubricant cleaner longer |
| Quality inspection | Dimensional + visual checks |
| Documentation | Material/inspection docs on request |
| Traceability | Optional batch traceability |
| Customization | OD style, lip style, material, spring |
| MOQ | Depends on size/customization |
| Lead time | Stock + made-to-order options |
| Typical equipment | Conveyors, mixers, extruders, fans |
| Service goal | Reduce leaks, extend maintenance intervals |
.png){kind=logo}
