| Attribute | Options / Notes |
|---|
| Product type | Durability-focused radial shaft seal |
| Primary equipment | Industrial gearboxes |
| Primary function | Lubricant retention |
| Secondary function | Contamination exclusion |
| Lip configuration | Single / Double (dust lip optional) |
| Spring | Garter spring standard; stainless optional |
| OD style | Metal case / Rubber-coated OD |
| Case material | Steel; stainless optional |
| Lip materials | NBR / FKM / HNBR / PTFE |
| Wear resistance | Compound dependent; enhanced options available |
| Temperature capability | Material dependent |
| Speed capability | Material/profile dependent |
| Pressure capability | Low pressure typical |
| Lubricants | Gear oils & greases (verify compatibility) |
| Dust lip | Optional |
| Shaft size (d) | Custom |
| Bore size (D) | Custom |
| Width (b) | Custom |
| Rotation | Bi-directional standard |
| Runout tolerance | Profile dependent |
| Misalignment tolerance | Profile dependent |
| Shaft finish | Fine finish recommended |
| Shaft hardness | Recommended per duty/abrasion |
| Housing fit | Press-fit |
| Installation | Driver tool recommended |
| Chamfer | Recommended |
| Assembly sleeve | Recommended for splines/keyways |
| Drag torque | Depends on preload and lubrication film |
| Heat generation | Depends on speed/material |
| Corrosion option | Stainless case optional |
| Marking | Size/lot marking optional |
| Inspection | Dimensional + visual checks |
| Traceability | Optional |
| Documentation | Optional COC/material/inspection docs |
| Customization | Size, lip, OD type, compound, spring |
| Typical gearbox types | Helical, bevel, worm, planetary (selection dependent) |
| Typical positions | Input/output shafts, end covers |
| Service goal | Reduce leaks and extend service intervals |
| Ordering data | d × D × b + rpm + temp + lubricant + dust level |
.png){kind=logo}
