Advanced radial shaft seals for industrial gearboxes and reducers—material and design options for demanding duty, improved wear control, and stable sealing (selection dependent).
Advanced Radial Shaft Seals for Industrial Gearboxes and Reducers
Advanced radial shaft seals with configurable lip designs and material upgrades to match demanding gearbox and reducer conditions.
Advanced Advantages
FKM/PTFE upgrade options (on request)
Optimized lip geometry for stable sealing
Optional dust lip for harsh environments
Custom sizes for OEM upgrades and replacements
Technical Attributes (40+)
| Attribute | Options / Notes |
|---|
| Seal type | Advanced radial shaft seal |
| Equipment | Industrial gearboxes/reducers |
| Sealing function | Oil/grease retention |
| Exclusion | Dust control |
| Lip configuration | Single / Double |
| Dust lip | Optional |
| Spring | Garter spring |
| Spring material | Steel / SS option |
| OD structure | Metal case |
| OD option | Rubber-coated OD |
| Case material | Steel / SS option |
| Material set | NBR/HNBR/FKM/PTFE |
| FKM option | High-temp capable (request) |
| PTFE option | Low-friction option (request) |
| Wear resistance | Enhanced compounds |
| Lubricants | Gear oils/greases |
| Synthetics | Confirm compatibility |
| Temperature | Material dependent |
| Speed | Profile dependent |
| Pressure | Low pressure typical |
| Rotation | Bi-directional |
| Helix option | On request |
| Shaft size (d) | Custom |
| Bore size (D) | Custom |
| Width (b) | Custom |
| Runout | Profile dependent |
| Misalignment | Profile dependent |
| Shaft finish | Fine finish recommended |
| Shaft hardness | Duty dependent |
| Housing fit | Press-fit |
| Chamfer | Recommended |
| Install tool | Seal driver |
| Assembly sleeve | Recommended |
| Drag torque | Preload dependent |
| Heat | Speed/material dependent |
| Corrosion option | SS case option |
| Marking | Size/lot optional |
| Inspection | Dimensional + visual |
| Traceability | Optional |
| Documents | Reports on request |
| Customization | Size/lip/OD/material |
| Typical positions | Input/output shafts |
Upgrade Support
Send your operating conditions and goals (wear/heat/contamination). We’ll recommend an advanced configuration.
.png){kind=logo}
